Shanxi Wanli Technology Co., Ltd. always adheres to the enterprise purpose of "manufacturing high-quality products and creating the future", accumulates the brand with quality, expands the brand with service and extends the brand with science and technology.
Thousands of state science and technology existing highway system, weight fees and overrun detection system, the green channel fast inspection system, coal production monitoring system, silo quantitative loading system, security and control systems...
The company has passed ISO 9001 quality management system, ISO 14001 environmental management system and OHSAS 18001 three management system certification, health and safety management in mechanical and electrical installation contractor, computer systems...
Wanli technology creates an open media information platform, gathering first-hand information such as industry news and latest scientific research achievements in the weighing field, so that more people who pay attention to the development of wanli technology can know about...
By joining Wanli technology, you not only get a job, but also choose a group of people with rich experience, talent, professionalism and entrepreneurial passion as your working partner and entry mentor. We look forward to working with you to enjoy the passion of entrepreneurship...
Wanli technology is committed to providing excellent products and excellent customer service. For product details, technical support and agency cooperation, contact information of main departments of Wanli technology is provided here to facilitate timely and effective communication...
WL-SSP-0408C02传感器信号处理器（简称C02型处理器），是山西万立科技有限公司自行开发生产的，用于轴重式动态汽车衡（单/双秤台）的一款高性能传感器信号处理器。该处理器以高速增强型SOC微控制器为核心，以高性能AD为信号处理前端，将传感器信号在现场处理后，通过隔离的数字化总线传送给仪表，不仅彻底消除了由于传输线路导致的信号干扰和失真，而且大幅降低了传输线路的电缆芯数，节约了成本，降低了故障率。
| 型号 | WL-SSP-0408C02 | 使用环境 | 温度：-45～85℃ |
| 尺寸 | 271×226×95mm | 湿度：≤90％RH | |
| 功耗 | 最大4W | 储运温度：-45～85℃ | |
| 供电电源 | 9 – 36 VDC | 自重 | 约2.6kg |
| Ø 仪表通讯接口为隔离式RS422，配套电子称重仪表为XK3208-C9，拥有4路通道的AD | |||
| 名称 | 功能 | 含义 |
| P | 电源指示 | 常亮：设备已上电 |
| 灭：设备未上电 | ||
| 1 | 发送数据指示 | 闪烁：正在向仪表发送数据 |
| 灭：停止向仪表发送数据 | ||
| 2 | 接收数据指示 | 闪烁：接收到仪表发来的数据 |
| 灭：未接收到仪表发来的数据 | ||
| 3 | AD转换速度指示 | 闪烁：闪烁频率正比于AD转换速度 |
| 灭：AD转换停止 | ||
| 4 | 工作指示 | 呼吸显示：本机正常工作 |
| 其它显示：本机工作异常 |
